Module patt

The FMC_PATT read/write register contains the timing information for NAND Flash memory bank. It is used for 8-bit accesses to the attribute memory space of the NAND Flash for the last address write access if the timing must differ from that of previous accesses (for Ready/Busy management, refer to Section20.8.5: NAND Flash prewait feature).

Structs

PATT_SPEC

The FMC_PATT read/write register contains the timing information for NAND Flash memory bank. It is used for 8-bit accesses to the attribute memory space of the NAND Flash for the last address write access if the timing must differ from that of previous accesses (for Ready/Busy management, refer to Section20.8.5: NAND Flash prewait feature).

R

Register PATT reader

W

Register PATT writer

Type Aliases

ATTHIZ_R

Field ATTHIZ reader - Attribute memory data bus Hi-Z time These bits define the number of KCK_FMC clock cycles during which the data bus is kept in Hi-Z after the start of a NAND Flash write access to attribute memory space on socket. Only valid for writ transaction:

ATTHIZ_W

Field ATTHIZ writer - Attribute memory data bus Hi-Z time These bits define the number of KCK_FMC clock cycles during which the data bus is kept in Hi-Z after the start of a NAND Flash write access to attribute memory space on socket. Only valid for writ transaction:

ATTHOLD_R

Field ATTHOLD reader - Attribute memory hold time These bits define the number of KCK_FMC clock cycles during which the address is held (and data for write access) after the command de-assertion (NWE, NOE), for NAND Flash read or write access to attribute memory space:

ATTHOLD_W

Field ATTHOLD writer - Attribute memory hold time These bits define the number of KCK_FMC clock cycles during which the address is held (and data for write access) after the command de-assertion (NWE, NOE), for NAND Flash read or write access to attribute memory space:

ATTSET_R

Field ATTSET reader - Attribute memory setup time These bits define the number of KCK_FMC (+1) clock cycles to set up address before the command assertion (NWE, NOE), for NAND Flash read or write access to attribute memory space:

ATTSET_W

Field ATTSET writer - Attribute memory setup time These bits define the number of KCK_FMC (+1) clock cycles to set up address before the command assertion (NWE, NOE), for NAND Flash read or write access to attribute memory space:

ATTWAIT_R

Field ATTWAIT reader - Attribute memory wait time These bits define the minimum number of x KCK_FMC (+1) clock cycles to assert the command (NWE, NOE), for NAND Flash read or write access to attribute memory space. The duration for command assertion is extended if the wait signal (NWAIT) is active (low) at the end of the programmed value of KCK_FMC:

ATTWAIT_W

Field ATTWAIT writer - Attribute memory wait time These bits define the minimum number of x KCK_FMC (+1) clock cycles to assert the command (NWE, NOE), for NAND Flash read or write access to attribute memory space. The duration for command assertion is extended if the wait signal (NWAIT) is active (low) at the end of the programmed value of KCK_FMC: